FT II – FT III
FT USA V2
ANCILLARY EQUIPMENT
CUSTOMER CARE
CREMATORS
FT cremators are not only the most advanced but also the most cost efficient cremators on the market
Reliable systems
A crematorium with an average of 300 ceremonies a year places different demands on a cremator than a crematorium with 2,500 ceremonies. With the FT I, FT II and FT III, FT has used its many years of experience and know-how in the field of international cremations to develop extremely reliable and user friendly systems for all types of crematoriums.
Fully automated cremators with filter technology and continual emissions control are part of our standard range. We guarantee outstanding economic feasibility for all crematoria, regardless of the number of cremations. All our systems are built upon the principles of reliability, innovation, sustainability and (cost) efficiency. And of course the safety of your employees.
Energy consumption as low as possible at all times
To keep energy consumption as low as possible at all times, both the hardware and the computer control of our systems are subjected to continuous development and improvement. With ever-increasing energy costs, that is becoming even more important for your business.
More information?
If you are exploring the options, or if you want to know more about (requirements for) permits or need help with permit applications, then please contact us at +1 330 723 63 39 / +1 888 883 28 76 or info.usa@facultatieve-technologies.com. We would be delighted to help or advise you.
FINANCING AVAILABLE THROUGH LIVE OAK BANK
If you need financing to complete your crematory equipment purchase, Live Oak Bank specializes in funeral home lending. Learn more HERE, or contact a Live Oak Bank Loan Specialist at 866-438-9393.
SYSTEMS & PRODUCTS
FT II – FT III
The FT II and FT III are the most advanced cremators in the world
Specifications
| FT II | FT III | |
| Installed Height: | 10’-10” | 10’-10”/ Low Profile Design is less than 10′ |
| Installed Width: | 6’-111/2” | 7’1” |
| Length: | 12’-8” | 12’-8” |
| Weight: | 25,000 lbs | 32,000 lbs |
| Fuel: | Natural Gas / LPG | Natural Gas / LPG |
| Opening for installation: | 8’-9” wide x 8’-9” high | Standard 8’ wide x 9′ tall |
| Daily operation: | Without limit 24 hours/day | Without limit 24 hours/day |
| Average cremation time: | 75 minutes | 75 – 90 minutes |
Electrical Characteristics
| FT II | FT III | |
| Combustion air fan: | 1.200 cu.ft/min at 68°F, 7.5 hp | 1.200 cu.ft/min at 68°F, 7 hp |
| Ejector air fan: | 1.200 cu.ft/min at 68°F, 7.5 hp | 1.200 cu.ft/min at 68°F, 7 hp |
| Control System: | 15 Amps | 15 Amps |
| Electrical Supply: | 80 Amps service 208-230 V, 60Hz, 3 phase, 5 wire |
80 amps, 208-230 V, 60Hz, 3 phase, 5 wire (3 line, 1 ground, 1 neutral) Or 100 amps, 208-230 Volts, 60 Hz, single phase |
Fuel Consumption
| FT II | FT III | |
| Primary Burner ratings: | 853,00 Btu/hr | 950,00 Btu/hr |
| Secondary Burner ratings: | 1,023,640 Btu/hr | 1,100,000 Btu/hr |
| Natural Gas Requerements: | 12 cu.ft/min at 8” Water gauge (excludes pre-heating of cremator) |
Minimum 2 psi @ 2,5 mm BtuH |
LPG usage on request
Also available in double end format
FT USA V2
- Low price, high quality
- Short installation time
- Compact and quiet
- Fully automatic
- Excellent environmental performance
- Low maintenance, with easy acces to components
Specifications
| Installed Height: | 9′-7″ (115″) |
| Installed Width: | 6′-6″ (78″) including control panel |
| Length: | 14′-3″ |
| Weight: | 25,000 lbs |
| Fuel: | Natural Gas / LPG |
| Opening for installation: | 7′ wide x 8′ tall |
| Capacity: | 500 lbs. maximum charge / up to 3 cremations per day |
| Average cremation time: | 150 minutes |
Electrical Characteristics
| Combustion air fan: | 1.200 cu.ft/min at 68°F, 5.0 HP |
| Ejector air fan: | 1.200 cu.ft/min at 68°F, 5.0 HP |
| Electrical Supply: | 80 A service 208-230 V, 60 Hz, 1 phase, 4 wire (2 line, 1 ground, 1 neutral) |
Fuel Consumption
| Primary Burner ratings: | 950,000 Btu/hr |
| Secondary Burner ratings: | 1,100,000 Btu/hr |
| Natural Gas Requirements: | Minimum 2 psi @ 2.5 mm BtuH |
| LPG usage on request |